Industrial paint for road marking, concrete and asphalt based on synthetic resin and solvent Teknobond 960. This paint is used for marking on roads, highways, parking lots, parking lots, enterprise territories, warehouse complexes and pedestrian zones. The paint has optimal technical characteristics for fast and convenient work.
- The average consumption is approximately 150 grams per square meter.
- Setting time is about 15 minutes, and complete drying takes about 3.5 hours.
- Application is possible at temperatures from +5 to +35 °C.
Before application, the surface must be carefully prepared. The base must be dry, free from dust, dirt, oils and loose particles. If necessary, the surface must be repaired. Teknobond 960 marking paint is mixed before use and applied with a roller, brush or special road marking machines. In the video you can see the process of applying parking space markings with the Graco Auto-Layout System road marking machine. Teknobond 960 RAL 9003 white paint was used. After applying the markings, a clear, even and durable marking is formed. Also, in the video you will see the application of special marking signs:
⚪ White is the most common color of road markings. It is used to apply:
- center lines between traffic lanes
- road boundary lines
- pedestrian crossings ("zebra")
- direction arrows
- stop lines
- road signs and symbols
- parking space markings
🟡 Yellow color Used for prohibitions and temporary organization of traffic. It denotes:
- prohibition of stopping or parking along the curb
- temporary road markings during repairs
- lines separating oncoming traffic in dangerous areas
- public transport zones
🔵 Blue color is used mainly for special parking lots. It is used to apply:
- marking parking spaces for people with disabilities
- wheelchair symbol
- sometimes paid parking spaces
🟢 Green color Used for ecological or alternative transport. It denotes:
- parking spaces for electric cars
- electric vehicle charging zones
- ecological or "green" transport lanes
- sometimes cycling infrastructure
🔴 Red color is used to increase attention and danger zones. It is used to indicate:
- bike paths
- public transport lanes (in some cities)
- high-risk areas (intersections, crossings)
- special technological or production markings
Among the main advantages of the material are high wear resistance, quick drying, bright saturated color and good visibility of the markings even under intensive use. Teknobond 960 is a fast and reliable solution for road, warehouse and industrial markings, as well as for concrete floor renovation.
