Teknobond 300 Epoxy Primer is a two-component, low-viscosity, solvent-free epoxy primer. Suitable for concrete surfaces and cement screeds. Why is it important to use a primer? Without proper substrate preparation, epoxy paint may have poor adhesion to the surface and simply peel off. Teknobond 300 Primer penetrates deep into the surface, strengthens it, dedusts it and prepares it for the application of epoxy or polyurethane coatings.
Teknobond 300 epoxy primer is a universal material that can be used either on its own to strengthen and dedust the surface, or before applying:
✅Teknobond 600 epoxy paint
✅Chemical-resistant paint Teknobond 610
✅Teknobond 600 TIX structural paint
✅Polyurethane paint Teknobond 650 P
✅Self-leveling floor Teknobond 500
Before applying the primer, the surface should be cleaned of any types of oil, rust, detergents, dirt and other substances that prevent setting.
How to properly mix the two-component primer Teknobond 300:
To prepare the working solution, pour component B into component A and mix both components with a low-speed mixer until smooth for 2-3 minutes. The primer can be applied to the surface with a brush, roller or mechanical sprayer in 2 layers.
Important characteristics:
Compressive strength of the material - 90 MPa
Adhesion to concrete — 4 MPa
Shore hardness — 83
Teknobond 300 concrete primer has high wear resistance and resistance to impact loads, strengthens the base and prepares the surface for applying epoxy and polyurethane coatings, which will lay down evenly, without stains and overspending.
