Chemically resistant two-component epoxy paint Teknobond 610 for floors, walls and industrial surfaces. Teknobond 610 paint is specially designed for use in conditions of constant or periodic exposure to aggressive chemicals, acids and alkalis.

Teknobond 610 epoxy enamel is suitable for concrete, metal, wooden, plastered and gypsum surfaces, providing reliable protection for walls and ceilings in industrial and residential premises.

Application of Teknobond 610 epoxy paint

  • Teknobond 610 epoxy paint is ideal for smooth surfaces: metal, parquet, tiles, porcelain stoneware, ceramics, glass, porcelain.
  • Creation of a gas and vapor barrier coating with resistance to chemicals.
  • Rooms with constant high humidity: bathrooms, swimming pools, food processing plants.
  • Tanks with fuel, petroleum products and drinking water.
  • Food industry enterprises and laboratories, as well as industrial facilities in the paint, paper and fertilizer industries.

This makes Teknobond 610 a versatile solution for industrial, commercial and residential applications.

Advantages and characteristics of the chemical-resistant paint Teknobond 610

  • Waterproof and frost-resistant, provides long-lasting surface protection.
  • Easy to use – easily applied to a pre-prepared surface.
  • Resistant to chemicals and bacteria, making it safe for the food industry.
  • Easy to wash and clean, preventing the development of microorganisms on the surface.

Chemical resistance of Teknobond 610 paint to aggressive chemicals, acids, alkalis

Chemical substance Concentration Stability
Sulfuric acid 50% Resistant
Nitric acid 50% Resistant
Sodium hydroxide 50% Resistant
Formaldehyde 20% Resistant
Lactic acid 40% Resistant
Wine — Resistant
Seawater — Resistant
Diesel — Limited
Aviation fuel — Limited
Vegetable oils — Limited

 

Note: “Limitedly stable” means the possibility of short-term or periodic contact of the surface with the active substance.

How to properly mix and apply two-component chemical-resistant paint Teknobond 610

Make sure the surface is free from dust, dirt, oils, loose particles, cement mortar residues and primed. Damage should be repaired using Teknosel repair compounds.

Note: To prepare, strengthen the surface and reduce paint consumption, we recommend using TEKNOBOND 300 or  TEKNOBOND 310 primer .

Mixing Teknobond 610 two-component epoxy paint:
To properly prepare Teknobond 610 epoxy paint , gradually add component B to component A. Mix with a low-speed mixer at a speed of no more than 400 rpm for 2–3 minutes until completely homogeneous. Mix only the amount of paint according to the proportion that you can apply within its pot life of approximately 40 minutes to ensure a high-quality coating.

Teknobond 610 is a professional two-component epoxy paint that provides high chemical resistance, reliable protection of surfaces from the effects of sulfuric, nitric, hydrochloric, lactic acids. The paint is easy to apply and does not require special care.

Chemically resistant paint Teknobond 610 is ideal for concrete, metal, wood, plastered and gypsum surfaces. It is used for food and industrial premises, medical institutions and laboratories.