Teknolatex 300 is an adhesive primer for strong adhesion and long-lasting repairs. Primer is the basis for high-quality repairs, used for reliable adhesion of plaster, self-leveling floors, tiles and other finishing materials. Regardless of whether you are working indoors or outdoors, the right choice of concrete contact will ensure the strength and durability of the coating.

One of the best options is Teknolatex 300. This is an adhesion primer for glass, tiles, concrete, and other smooth or slightly absorbent surfaces.


What is Teknolatex 300 concrete contact?
Teknolatex 300 is a quartz concrete contact primer that significantly improves the adhesion of materials to the base. It makes the surface rough, reduces its absorption properties, creating ideal conditions for quick and high-quality repairs. Thanks to the unique properties of Teknolatex 300, you can lay tiles on tiles without dismantling the old coating or even glue tiles on glass!


Advantages of Teknolatex 300 primer:

  • For any surfaces: concrete, glass, ceramics, OSB, MDF, drywall, old tiles.
  • High adhesion: reliable adhesion to smooth and dense substrates.
  • Elasticity: suitable for surfaces that can deform.
  • Creates a rough finish: an ideal base for plaster, tiles, and self-leveling floors.
  • Vapor permeability: prevents the formation of mold and mildew.
  • Water resistance: ideal for bathrooms, kitchens, terraces and balconies.
  • Ease of application: ready to use, no dilution required.

 

Features:
Full drying time of the material: 3-4 hours
Consumption: 200-300 g/m²
Application temperature: +5°C – +35°C


Where to apply Teknolatex 300 primer?

  • To improve adhesion when laying tiles.
  • For preparing surfaces before applying plaster or self-leveling floor.
  • To reduce substrate absorption, which prevents premature drying of finishing materials.
  • For working with wet rooms - bathrooms, swimming pools, kitchens.
  • For processing complex substrates – glass, ceramics, old tiles, OSB, MDF.


How to apply Teknolatex 300? (Step-by-step instructions)

  1. Clean the surface – remove dust, dirt, grease and old coatings.
  2. Make sure the base is dry – the temperature should be between +5°C and +35°C.
  3. Apply the primer with a brush or roller in an even layer.
  4. Drying time is 3 to 4 hours before applying the next layer.


Teknolatex 300 is the perfect solution for any repair!
Do you want a reliable basis for repairs? Teknolatex 300 is durability, reliability and ease of use.


Watch a detailed video review of the material: 

For additional information and the correct selection of material, call: +38 (067) 486 42 41