Mold, mildew, and fungus – why are they dangerous? Causes and how to quickly get rid of fungus on walls forever?

Mold and mildew on walls, ceilings, floors in a house, basements, and window sills is a serious problem, both from an aesthetic point of view and from the point of view of impact on human life and health. Most often, mold and mildew appear in damp and poorly ventilated rooms - these are basements, bathrooms, kitchens, rooms in which waterproofing is not done correctly, or there is no heating. 


Why does mold and fungus appear? 

There can be several reasons for the appearance of fungus and mold, and here are the main ones:

  • High humidity is a major factor that contributes to the growth of mold. Humidity can increase due to water leaks, condensation, or insufficient ventilation.
  • Poor waterproofing – if the foundation or basement walls do not have proper protection against moisture penetration, it can accumulate and create favorable conditions for the development of fungi.
  • Insufficient air circulation – lack of ventilation contributes to moisture stagnation in rooms.
  • Temperature changes – the difference between indoor and outdoor temperatures can cause moisture condensation on the walls.

And as a result, we get the appearance of black spots from harmful microorganisms, the spores of which settle in the lungs and cause significant harm to our health, causing allergic reactions, asthma, bronchitis, headaches, fatigue and a significant decrease in immunity. Fungus and mold are especially dangerous for children and the elderly. 


How can you prevent the appearance of fungus and mold?

  • Humidity control – maintain indoor humidity at 40-60% using dehumidifiers and air filters or air conditioners.
  • Proper waterproofing – use quality waterproofing materials for foundations, walls, and floors. 
  • Improve ventilation – install exhaust fans in the bathroom and kitchen, and ventilate the room regularly.
  • Thermal insulation – insulating walls and basements helps reduce condensation.
  • Promptly eliminate leaks – promptly repair pipes, roofs, and other sources of water leakage.

 

How to get rid of fungus and mold if they have already appeared on your walls?

  1. If mold has already appeared, you should take immediate action:
  2. Mechanically clean the affected areas with a brush or sponge;
  3. Treat the surface with special antifungal agents;
  4. Dry the room and improve its ventilation.

One of the effective methods of combating fungus and mold is  TEKNO ANTI KUF blocking paint - a one-component UV-resistant paint for combating and protecting against fungus and mold.


Areas of use

  • For use on painted/unpainted surfaces
  • In places with high humidity (basements, cellars)
  • North sides of building facades

Anti-mold paint is suitable for both exterior and interior use.

 

The main advantages of mold blocking paint: 

  1. The material is one-component and ready to use. 
  2. It has a rapid antifungal effect and dries quickly.
  3. The paint is resistant to moisture, ultraviolet radiation and alkaline environments. 
  4. High adhesion to any wet substrates allows the paint to be used effectively in any conditions. 

How to use Tekno Anti Kuf anti-mold and anti-fungal paint?

  1. The application surface must be solid and free of substances that prevent adhesion. 
  2. Any protrusions on the surface must first be cleaned and leveled mechanically. 
  3. The paint must be mixed before use.   


Applying Tekno Anti-Kuf blocking paint

  • Work should be carried out in the absence of precipitation.
  • The paint should be applied in one layer. If a second layer of material is required, wait at least 1 hour after applying the first layer.
  • The material can be applied with a brush or roller.
  • After partial use, the paint can must be tightly closed.
  • Tools and equipment must be washed immediately after use; after the material has hardened, this can only be done mechanically.   

Mold and mildew are serious problems that affect both the building and the health of its occupants. It is important to prevent their appearance by controlling humidity levels, ensuring waterproofing and proper ventilation. If mold has already appeared, it is necessary to take quick measures to eliminate it.


For additional information and the correct selection of material, call: +38 (067) 486 42 41