Teknobond 960 industrial road marking paint is a fast and reliable solution for creating clear, bright and durable markings on concrete and asphalt surfaces. The material is designed for use on roads, parking lots, warehouses, enterprise areas and other industrial facilities where high wear resistance and good visibility of the markings are important.

Teknobond 960 paint has a rich color and high resistance to abrasion, which allows it to be used even in conditions of intensive use of transport and equipment.

Where is Teknobond 960 marking paint used?

Teknobond 960 paint is intended for marking on various types of objects:

  • roads and motorways
     

  • parking lots and parking lots
     

  • enterprise territories
     

  • warehouse complexes
     

  • logistics centers
     

  • pedestrian zones
     

  • industrial concrete floors
     

Using Teknobond 960 paint, you can apply:

  • parking space markings
     

  • axial and marginal lines of movement
     

  • direction arrows
     

  • pedestrian crossings
     

  • stop lines
     

  • special symbols and inscriptions
     

  • technological marking in warehouses
     

Paint is also often used to mark safety zones, logistics routes, and production aisles.

Main technical characteristics of road marking paint

Teknobond 960 industrial paint is made on the basis of synthetic resin and solvent, which ensures strong adhesion to the surface and durability of the coating.

Main characteristics:

  • Consumption: approximately 150 g/m²
     

  • Setting time: about 15 minutes
     

  • complete drying: approximately 3.5 hours
     

  • application temperature: from +5 to +35 °C
     

  • high wear resistance
     

  • bright saturated color
     

  • good visibility of markings

 

  • wide color palette

 

  • ready to use

 

Thanks to the quick drying, road or parking markings can be put into operation a short time after application.

Road marking paint colors

Teknobond 960 paint is available in several colors that are used for different types of marking:

⚪ White color

The most common road marking color.
Used for:

  • center lines between traffic lanes

  • edge lines of the road

  • pedestrian crossings

  • direction arrow

  • stop line

  • inscriptions and symbols

  • parking space markings

🟡 Yellow color

It is used for prohibitions and temporary organization of traffic:

  • prohibition of stopping or parking

  • temporary road markings during repairs

  • dangerous sections of the road

  • public transport zones

🔵 Blue color

Used for special parking lots:

  • parking spaces for people with disabilities

  • wheelchair symbol ♿

  • sometimes paid parking spaces

🟢 Green color

Applicable for ecological transport:

  • parking spaces for electric cars

  • electric vehicle charging zones

  • ecological transport lanes

  • cycling infrastructure

🔴 Red color

Used for high-visibility and hazardous areas:

  • bike paths

  • public transport lanes

  • high-risk areas

  • special technological marking

⚪ Gray color

Grey road markings are used mainly for technical and auxiliary purposes. They are less contrasting than white or yellow, so they are used where it is not necessary to attract unnecessary attention or to hide old markings.

Where gray markup is used:

  • Overlaying old markings
    Gray paint is often used to cover old lines and signs before applying new road markings.

  • Technical marking in production and warehouses.
    Used to mark equipment boundaries, service areas, and personnel passages.

  • Zoning of industrial floors
    Suitable for marking warehouse areas, storage areas, service areas.

  • Marking on light concrete
    On very light surfaces, gray paint creates a soft contrast and looks neater than bright colors.

  • Auxiliary or temporary marking.
    Can be used for construction sites or temporary zoning of the territory.

Surface preparation before applying road marking paint

To make the marking durable, the surface must be properly prepared.

Before applying paint, you must:

  1. Clean the base from dust, dirt and debris

  2. Remove oils, grease and loose particles

  3. Make sure the surface is dry.

  4. If necessary, repair damaged areas.

High-quality surface preparation significantly increases paint adhesion and the service life of the marking.

How to apply road marking paint

Teknobond 960 paint must be mixed thoroughly before use.

Application is possible in several ways:

  • roller
     

  • with a brush
     

  • special machines for road marking
     

In professional work, marking machines are usually used, which allow for the smoothest lines and precise geometry.

In practice, Graco Auto-Layout System equipment is often used to mark parking spaces, which ensures accuracy and high speed of work.

Can I paint a concrete floor with road marking paint?

Yes, Teknobond 960  can be used not only for road marking.

The paint is also suitable for:

  • painting concrete floors in production
     

  • marking of logistics areas in warehouses
     

  • applying dividing lines on industrial floors
     

  • creating navigation in parking lots
     

This makes the material a universal solution for warehouse and industrial marking.

Main advantages of Teknobond 960 paint

Among the main advantages of the material:

  • quick drying
     

  • high wear resistance
     

  • bright and saturated color
     

  • good visibility of markings
     

  • ease of application
     

  • can be used on concrete and asphalt
     

Due to these characteristics, Teknobond 960 is widely used for road, warehouse and industrial marking.