Cracks on the balcony? Leaking roof? Moisture in the foundation or on the facade? Need to reliably seal a shower tray or cover temperature joints? The modern solution is Teknomer 700 liquid elastic waterproofing. This is a UV-resistant waterproofing on a hybrid polymer base with ultra-high elasticity of up to 700%. The material forms a durable seamless membrane (like liquid rubber) that effectively bridges cracks and protects structures from water penetration.
What is modern MS-polymer waterproofing Teknomer 700 :
Teknomer 700 is a modern seamless waterproofing based on a hybrid polymer, which combines high elasticity and durability. The material effectively bridges cracks and compensates for deformations of the base, maintaining the integrity of the coating even with temperature fluctuations. It is resistant to ultraviolet radiation, does not turn yellow and does not lose its properties under the influence of the sun, which makes it ideal for open terraces, balconies and roofs.
Teknomer 700 demonstrates excellent adhesion even to wet and complex surfaces without the need for prior priming, which significantly simplifies and speeds up the process of waterproofing, sealing and crack repair.
A separate advantage of the seamless hybrid polymer waterproofing Teknomer 700 is the possibility of applying it to expansion and temperature joints, even if a polyurethane sealant has already been used there. Teknomer 700 works perfectly on polyurethane, creating a single elastic waterproofing system.
The material is easily applied with a roller or brush, forming a continuous seamless layer of waterproofing, resistant to both non-pressure and pressure water pressure. Due to its high frost resistance and ability to maintain elasticity even at low temperatures, the coating works reliably in harsh climates and seasonal temperature changes.
The main advantages of Teknomer 700 seamless waterproofing :
Teknomer 700 is a modern hybrid polymer waterproofing that combines ease of application and professional reliability.
One-component composition - the material is completely ready to use. Just open the bucket, mix thoroughly and you can start applying immediately. There is no need for complex dosing or mixing of components, which minimizes the risk of error and saves time on site.
Seamless coating - after drying, a continuous elastic membrane is formed without joints and overlaps. It is the joints that most often become the weak point of rolled materials, while Teknomer 700 forms a monolithic layer through which water has no way to penetrate.
Crack bridging - the material has high elasticity and is able to bridge existing microcracks, as well as compensate for further deformations of the base. This is especially important for terraces, balconies and roofs, where structures are constantly exposed to thermal expansion.
UV resistance - the coating does not break down under the influence of sunlight, does not crack and does not lose elasticity over time. This allows the material to be used on open surfaces without an additional protective layer.
Chemical resistance - Teknomer 700 withstands the effects of acidic and alkaline solutions, which makes it suitable for use not only in residential construction, but also in industrial facilities, in technical rooms and areas with increased operational load.
Where is it advisable to use MS-polymer waterproofing Teknomer 700 ?
Teknomer 700 is a universal seamless waterproofing that is suitable for both interior and exterior work due to its high elasticity, adhesion, and resistance to weathering.
Foundations. The material effectively protects concrete structures from soil moisture, capillary suction and the effects of pressure and non-pressure water. Due to the ability to bridge cracks and work at low temperatures, the coating maintains tightness even during seasonal soil movements.
Facades. Teknomer 700 can be used to protect facade elements from precipitation and microcracks. Resistance to ultraviolet radiation allows the material to be used on open surfaces without the risk of destruction under the influence of the sun.
Roofs. The ideal solution for flat roofs, abutments, parapets and communication passage nodes. The seamless membrane minimizes the risk of leaks in the most problematic places - joints and abutment zones.
Balconies and terraces. Constant temperature changes, rain, snow and mechanical loads require an elastic and wear-resistant material. Teknomer 700 compensates for deformations of the base and creates a reliable waterproof layer under tiles or other finishing coatings.
Shower trays and wet areas. Suitable for waterproofing bathrooms, showers, and toilets before tiling. Provides tightness at wall-floor joints and prevents moisture from entering the structure.
Sealing joints and cracks. Due to its high adhesion to concrete, metal, wood and other substrates, the material can be used to treat temperature joints, structural joints and local crack repairs, creating elastic and durable protection.
Teknomer 700 is a modern seamless waterproofing that combines elasticity, strength and durability in one solution. Reliable protection where water has no chance.
