Hydroseal for immediate stopping of active water leakage Teknoplug (20 kg)

Teknoplug (water seal) is a quick-setting repair compound based on special cements and active chemical additives to instantly stop active water leaks from cracks, joints, and seams.
Scope

• basements, elevator shafts
• highways, subways, tunnels, dams
• reservoirs, swimming pools, drinking water tanks
• used for fastening metal anchors.

Advantages

• easy to use for quick repairs
• for fastening metal anchors and fasteners
• instant setting upon contact with water
• environmentally friendly
• high adhesion to the surface
• high water resistance, frost resistance, durability

Instructions for use

The surface for application must be cleaned of any types of oil, rust, detergents and other substances that prevent setting. Teknoplug material is a dry mixture that must be mixed with water in a proportion of 270 ml per 1 kg of the composition to a plastic state.

At high temperatures or to slow down the setting, the material is mixed with cold water. At low temperatures or to speed up the setting process, it is mixed with warm water +40°C. The solution must be mixed manually, and in small quantities to be used within 1 minute. Having given it the necessary shape, you need to wait until the composition begins to set, but at the same time it must maintain plasticity. It is necessary to lay the solution in the repaired area and hold it until the leak stops completely. If the leak occurs from a large hole, the sealing process takes place in several stages.

Wear gloves when mixing and applying. After applying Teknoplug   to the surface, Teknomer 100 must be applied for absolute waterproofing protection.

 FEATURES