Penetrating waterproofing Teknomer 100 (20 kg)

Penetrating waterproofing mixture based on special cements and additives

Scope:

• Reservoirs, pools and drinking water tanks
• Reinforced concrete rings of wells
• Pools and tanks, cellars and basements
• Infrastructure facilities
• Walls of basements or underground structures
• Capillary cut-off in front of brickwork
• In engineering structures such as subways, tunnels, dams
• Basements, tunnels, elevator shafts

Advantages:

• penetrates deeply into concrete substrates
• waterproofing for negative water pressure 
• resistant to negative and positive water pressure
• can be applied by hand or by spraying

Instructions for use:

1. Brush application. The concrete surface is moistened and soaked with water. The surface can be damp, but not wet. If there is active leakage, it must be stopped with TEKNOPLUG . The prepared mixture is applied to the surface with a brush in 2-3 layers. It can be applied with a stiff bristle brush or by mechanical spraying. The layers should be applied perpendicular to each other. The waiting time between layers is maintained so that the previous layer does not stick to the fingers.
2. Spraying. TEKNOMER 100 is sprayed onto the prepared concrete surface in an even layer.

Usage Notes / Limitations:

• Do not use on surfaces made of wood, chipboard, MDF, plywood, PVC and metal.
• Use gloves, a mask and goggles when working.
• Use recommended mixing ratios
• After applying the solution, the surface must be protected from adverse weather conditions, such as direct sunlight, strong wind, high air temperature (above + 35 °C), rain and frost.
• Tools and equipment used should be washed with warm water immediately after use.

FEATURES

Cost table