Paraffin emulsion (curing) Teknokur 405 for protection of fresh concrete surfaces, 30 kg

Teknokur 405 is a high-quality membrane-forming agent for concrete surfaces based on emulsified paraffin. It is designed to protect freshly placed concrete from rapid moisture loss. Due to the formation of a film on the surface, moisture is retained in the concrete layer, which has a beneficial effect on the strength gain of concrete and reduces the risk of shrinkage cracks.

APPLICATION

Teknokur 405 is applied to freshly placed concrete, creating a durable, wear-resistant and dust-free surface. It is used for laying concrete at elevated air temperatures or in strong winds. Suitable for both indoor and outdoor use. Typically used in warehouses, parking lots, retail spaces, aircraft hangars, can also be used to protect concrete roads and in the construction of engineering structures such as bridges, subways, tunnels.

FEATURES / ADVANTAGES

• Effectively retains moisture necessary for cement hydration in concrete.
• Much more effective than classic methods such as covering with wet burlap, film, or moistening.
• Reduces the likelihood of shrinkage cracks in concrete.
• Improves the mechanical strength of concrete.
• Contains no solvents, can be used indoors.
• Easy to use, significantly reduces labor costs.

NORMS/STANDARDS

EN 1504-9

MATERIAL INFORMATION

TECHNICAL INFORMATION

APPLICATION INFORMATION

This figure is theoretical and does not include additional material consumption required due to surface porosity and temperature conditions.

Drying time may increase or decrease significantly depending on temperature.

MATERIAL DATA BASIS

The above technical data are obtained from laboratory tests carried out at a temperature of + 20 °C and a relative humidity of 50% in the Tekno Yapı Kimyasalları laboratory. The results are obtained 28 days after the tests. The actual characteristics of the material may vary due to reasons beyond our control.

Since we have no control over the installation process and operating conditions, we are only responsible for the quality of the material. The production of materials is periodically optimized and improved, we have the right to make changes to the technical description of the materials without informing the client.

APPLICATION INSTRUCTIONS

SUBSTRATE QUALITY / PREPARATION

The material should be mixed well before use.

CAUSING

Teknokur 405 should be applied to freshly placed concrete after 30-120 minutes on the untreated surface of existing concrete. The material can be applied by brush, roller or spray, in a continuous, even layer. Application to freshly placed concrete provides additional surface sealing and protects against premature moisture evaporation, and when applied to an existing concrete surface provides additional reinforcement. For outdoor use, the second layer can be applied within 6 hours after applying the first.

CLEANING THE TOOL

Clean tools and equipment with water immediately after use. Hardened material can only be removed mechanically.

LIMITATION

• At high temperatures (above +30 C), store Teknokur 405 in a cool place before use.
• At low temperatures (below +5 C) this product may thicken, reducing its ability to be applied by spraying.
• Keep spraying equipment clean and thoroughly clean it before use to remove any residue from previous protective materials.
• When applying with a spray gun, ensure even coverage of the base.
• Teknokur 405 must be mechanically removed before applying any other coating.

SAFETY MEASURES

The product may cause irritation if it comes into contact with the skin. It is necessary to use work clothes, protective gloves, a mask and glasses. You can also apply a protective cream to your hands before starting work. In case of contact with eyes, immediately rinse your eyes with warm water and consult a doctor.