Bitumen-rubber mastic ADW Izoplast Dysperbent, 20 kg

Disperbent water-based bitumen-rubber mastic, 20 kg ADW

• Color - Black
• Packaging - 20 kg bucket.

Application features:

• Stir before use. The surface must be flat, clean of dust and dirt.
• Concrete, gypsum, ceramic, etc. surfaces should be primed with DYSPERBENT solution diluted with water in a ratio of 1:1.
• Do not store the diluted solution.
• To protect the waterproofing coating from mechanical damage in the underground parts of the building, apply "Dysperbent" using a spiked membrane.
• Apply the mass using a roofing brush, brush or spatula at temperatures from +5°C to +25°C and in damp weather.
• The drying time of one layer of coating at a temperature of 20 °C is 6 hours.
• Depending on the need, apply the material in 2-3 layers.
• Apply each subsequent layer after the previous one has dried.
• Can be used on a slightly damp surface, then the drying time of the coating increases.
• The coating becomes waterproof only after complete curing.

Note! Follow safety and labor protection techniques when performing work. Use protective gloves, clothing, glasses. In case of contact with skin, wash with plenty of soap and water. In case of contact with eyes, rinse with plenty of water and consult a doctor.