Acrylic superelastic mastic for waterproofing resistant to UV radiation Teknomer 300 EX (20 kg) White

Teknomer 300 EX is a highly elastic water-based acrylic mastic for waterproofing buildings, swimming pools and tanks.

Scope:

• Pools and water tanks
• Kitchens, baths and showers, laundry rooms and bathrooms
• External walls of silos and warehouses
• Suitable for any mineral substrates (concrete, plaster, aerated concrete, brick)
• Suitable for plasterboard and OSB boards
• Can be used in combination with thermal insulation materials
• To create a moisture-proof layer under tile materials
• To create waterproofing before laying floor coverings (wood, plastic, linoleum)

Advantages:

• Ready to use
• UV resistant
• High resistance to moisture penetration
• For use inside and outside buildings
• Solvent-free, non-toxic
• Creates a strong protective membrane on the application surface
• Resistant to cracking

Instructions for use:

The surface must be flat, free from dust, dirt, oils and other substances. If there are cracks or potholes on the surface, they must be closed using the appropriate Teknorep repair mixtures. After repairing the surface, the mastic should be applied no earlier than 72 hours later. Mix before use. To use Teknomer 300EX as a primer, it is necessary to dilute the material with water in a ratio of 1:1. The material must be applied using a brush, roller or sprayer, each subsequent layer should be applied perpendicular to the previous one. If desired, you can use a fiberglass reinforcing mesh.

To obtain absolute protection against moisture, it is recommended to tape all joints and corners with waterproofing tape.

Usage Notes/Limitations:

Observe safety and labor protection techniques during work. Use protective gloves, clothing, glasses. In case of contact with skin, wash with plenty of soap and water. In case of contact with eyes, rinse with plenty of water and consult a doctor.

FEATURES