Polyurethane sealant Tekno PU 40 R Flex Super, gray, 600 ml

Tekno PU 40 R Flex Super polyurethane sealant  is a one-component, highly elastic, moisture-resistant sealant for horizontal and vertical joints.

Areas of application:

• For construction joints on concrete, wood, brick, metal, aluminum and PVC surfaces
• For seams up to 35 mm wide
• For joints in structures and products made of brick, wood, metal, aluminum and PVC
• For seams on the outside of windows, doors and edges in hospitals, residential buildings and shopping malls
• For seams of drainage trays and drains
• For seams on joints and joint details on prefabricated gutters, gutters, reinforced concrete roofs
• For seams and joints of roads and bridges
• For joints in concrete and reinforced concrete structures
• For joints in precast concrete wall panels

Properties of the sealant:

• Moisture resistant
• Resistant to ultraviolet radiation
• Resistant to aggressive environments and temperature extremes
• Can be painted
• Does not require primer
• High adhesion to concrete, stone, metal, wood and other building materials

Instruction:

• Before applying the material, clean the surface from any type of oil, rust, detergents, dirt and other substances that prevent setting. Do not apply to damp surfaces.
• All joints and seams should be thoroughly cleaned with a wire brush or sandblasted before applying the sealant, and any remaining dust should be removed with compressed air.
• To avoid spreading the sealant beyond the joints, masking tape should be used. You can use a sealant gun or a special nozzle for application.
• Place the sealant inside the sealant gun and open the end of the package. Adjust the tip to the width of the joint. Carefully apply the mixture to the joints by pressing the trigger of the sealant gun. After the sealant has hardened, remove the masking tape.

Notes:

• Work should be carried out at an ambient temperature above + 5 °C.
• Do not work on damp/wet surfaces.

Characteristics