|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Teknopoliderz 2K is a two-component polyurethane self-leveling elastomeric bitumen-modified joint sealant that provides waterproofing between concrete elements. It is a cold-applied sealant resistant to jet fuel, conventional fuel and motor oil.
Areas of application:
- For work on runways and parking lots at airports.
- For connecting seams on the surface of above-ground fuel and engine oil storage facilities.
- For asphalt and concrete surfaces, natural stone surfaces, mosaics and sheet metal with a suitable primer.
- For work on military fields.
- For filling joints between asphalt and asphalt, asphalt and concrete, concrete and concrete, with the depth of filling the joints reaching half the width, and the minimum depth being 1 cm.
- For filling joints between bitumen and concrete coatings.
- For repairing cracks on asphalt and concrete roads.
- For filling joints in parking lots, underground parking lots and car washes.
Features and benefits:
- Easy to use
- Suitable for outdoor and indoor use
- Elastic
- Does not contain solvents
- UV resistant
- Resistant to changing weather conditions
- Resistant to various solvents, jet fuel and oil
- Based on polyurethane
- Complies with technical standards TS 5926 EN 14188-2, SS-S-00200D and BS 5212
Instructions for use:
- Before using Teknopoliderz 2K, the joints should be cleaned of dirt and all substances that prevent setting using compressed air.
- Lay the sealing harness.
- Before applying the material, the surface (concrete surface, exposed brickwork, asbestos cement, natural and artificial stone, polyester and hard PVC, metal) should be primed with Teknobond 110 .
- To prepare the working solution, first mix component A separately using a low-speed electric mixer (500 - 800 rpm). Then add component A and mix the solution until a homogeneous mixture is obtained for at least 3 minutes.
Precautions for use/restrictions:
- Do not add foreign materials to the mixture.
- It is recommended to wear work clothes and protective gloves.
- Tools and equipment used must be washed immediately after use.
- Do not use the mixture during rain.
FEATURES
|
Indicator name |
Normative value |
|
Composition |
Two-component polyurethane |
|
Color |
black/grey |
|
Packaging |
10 kg |
|
Type |
Thixotropic |
|
Store in a dry, dark place, maintaining a temperature range of +5 0 С - +35 0 С, humidity 75% |
12 months in closed original packaging |
|
Density |
1.30 ± 0.05 kg/l |
|
Application temperature |
from + 5 °C to + 50 °C |
|
Mixture life |
35 - 45 min. |
|
Shore Hardness (A) |
20 + 5 |
|
Full set of strength |
12 hours (with a seam depth of 1 mm) |
|
Elongation at break |
600% |
|
Maximum allowable seam deformation |
25% |
|
Volume of solid |
100% |
|
Elasticity |
> 90% |
|
For seams |
from 10 mm |
|
Operating temperature range |
-30 °C - + 80 °C |