Corner bumper CG 50B vinyl for protecting columns and walls, white, 3 m

Corner bumper CG 50 B is a reliable solution for protecting columns, wall corners and protruding parts of buildings from damage and wear caused by collisions with moving objects. The product is available in several color options, which allows not only to provide functional protection, but also to harmoniously complement the interior.

Thanks to its stylish design, the CG 50 B performs a dual role - technical and aesthetic. It protects walls and corners from mechanical influences and at the same time acts as a decorative element.

CG 50 B corner bumpers are widely used in buildings with high traffic: shopping malls, hospitals, restaurants, hotels, administrative and public institutions.

Assembling:

• Determine the height of the corner bumper.
• If you need to trim the bumper, use a hacksaw or a construction knife and a metal ruler (square).
• Make sure the wall is dry and clean.
• Remove all irregularities in the wall for best results.
• Before applying the glue, wipe both sides of the bumper to make sure the surfaces are free of dust and dirt.
• Apply glue only to the wall surface. It is recommended to use Tekno PU liquid nails glue .
• Allow the glue to cure. The curing time depends on temperature and humidity.
• Place the bumper sheet on the wall, align and press it into place by hand.
• Roll the bumper strip in place using a pressure roller. Start rolling in the center and work your way out to the edges. Remove any excess adhesive after installation.

Characteristics:

• Note: This model does not come with any accessories.
• Size: 50x50 mm
• Profile length: 3 m

* the entire color palette consists of 32 colors and is available when ordering from 300 m.p. each unit of goods