Teknowrap C Tape unidirectional carbon fiber reinforcing rope

Teknowrap C  is a unidirectional carbon fiber reinforcing rope.

Areas of application:

• To increase the load-bearing capacity of brick and stone structures
• For the restoration of historical sites
• To increase the strength and stability of structures at attachment points

Features:

• Easy to use
• Has high mechanical and chemical resistance
• Has a high modulus of elasticity 
• Minimum weight and material thickness

Instructions for use

Surface quality, joints and joint surfaces must be dry and free from any kind of dust, dirt, loose and loose particles, cement mortar residues, oil and grease. If there are weak concrete parts, they should be removed, then the surface should be repaired using Teknogrout or Teknorep repair mixtures.
The concrete base must be strong and have sufficient compressive strength (minimum 25 N/mm²) and a tear strength of at least 1.5 N/mm².
First, prepare and cut the rope of the required length using scissors or a clerical knife. Then prepare Teknobond 300 epoxy glue, impregnate the rope with it and insert it into the previously prepared joints.

Notes:

• The structural strengthening project must be designed and executed under the supervision of an experienced civil engineer. 
• Clean tools and equipment with water immediately after use. Hardened material can only be removed mechanically.
• The product may cause irritation if it comes into contact with the skin. It is necessary to use work clothes, protective gloves, a mask and glasses. You can also apply a protective cream to your hands before starting work. In case of contact with eyes, rinse your eyes immediately with warm water and consult a doctor.