|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
The formwork tie screw is used for fastening formwork panels, plywood, OSB. The tie screw is made of high-strength quality steel, which allows it to withstand high loads. The advantageous feature of the tie screw is its low weight and specially rolled thread, which allows you to unscrew the formwork nuts without unnecessary effort, even when the screw area is contaminated. for fastening light vertical formwork and homemade formwork. Used in conjunction with a super plate or wing nut. Anchor screws and tie nuts take the pressure of the concrete mixture, so the choice of formwork components is of great importance for safe work. without unnecessary effort even when the screw area is contaminated with concrete.
The formwork tie screw is used with flange nuts for light and self-made formwork or support nuts for wall formwork systems and columns of medium and heavy series. It is used together with nuts, protective plastic tube and cones.
They are supplied in factory lengths of 3 meters and are cut on site according to the formwork fastening specification.
The advantageous feature of the tie screw is its low weight and specially rolled thread, which allows you to unscrew the formwork nuts without unnecessary effort, even when the screw area is contaminated with concrete.
The formwork tie screw is used for fastening light vertical formwork and self-made formwork.
It is used together with a super plate or a ram nut.
External cross-section: 17 mm
Internal cross-section: 15 mm
Length of one tension screw: 3 linear meters