Acrylic finishing putty Teknorep 110 White (25 kg)

Teknorep 110 (white) – acrylic putty for finishing walls and ceilings inside and outside the premises.

Properties

- Vapor-permeable
- Waterproof
- Frost-resistant
- Ready to use and does not require surface priming
- Plastic and elastic
- Manual and mechanized application
- Fine-grained, easily sanded
- Creates a perfectly smooth surface ready for finishing
Area of ​​use

- Concrete substrates
- Gypsum, cement-sand, cement-lime plasters
- Fiberboard, chipboard, OSB boards
- Before painting, plastering, decorative finishing or wallpapering
- For filling joints between plasterboard sheets
- For restoring the protective and decorative layer in thermal insulation systems
- For repairing small cracks on surfaces

Surface preparation

- The surface prepared for applying putty must be dry, strong and clean;
- If necessary, the surface must be repaired with appropriate Teknorep repair mixtures, which will be used before starting puttying.
- Preparation of the solution and application

- Before use, mix the putty thoroughly until smooth for 5 minutes;
- Apply to the surface using a metal spatula or a half-grater;
- Apply the second and subsequent layers of putty after the previous one has dried, after 3-4 hours;
- After the putty has dried, the surface can be sanded and dusted.

Characteristics