|
Quantity
|
Total
|
||
|
|
|||
Bitumen-polymer two-component elastic thick-layer water-based waterproofing.
Application areas:
- Ceilings, roofs, foundations, retaining walls, columns.
- As a waterproofing agent to protect concrete, brick, iron and wooden surfaces from water and moisture.
- Waterproofing of drainage and sewer channels, collectors.
- Waterproofing of sumps, wells, tanks.
- Rooms and places with high humidity.
- Bonding of lightweight thermal insulation boards.
Features and Benefits
- Forms a solid and seamless waterproofing layer.
- Can be applied by brush, roller or airless spray.
- Maintains elasticity even at low temperatures.
- Since it does not contain solvents, it is environmentally friendly and can be used indoors.
- Can be applied to dry and slightly damp surfaces.
Surface preparation and application
The surface to be applied must be free of dust, oil, dirt, rust and other substances that may reduce the adhesion of the material.
Weak parts of the surface, cavities, holes and cracks must be repaired in advance with appropriate Teknorep repair mortars.
Before applying Teknomer 400 2K EX, the prepared surface must be coated with Teknomer 400 Astar bitumen-rubber primer.
Mix component A with an electric mixer (300-400 rpm) or other similar equipment until a uniform color and consistency is achieved. Add component B to component A and mix for 3 minutes until the mixture achieves a uniform color.
The mixed, ready-to-use product is applied to the surface with a stiff-bristled brush, roller or spray. Each subsequent layer of material is applied no earlier than 3 hours after the previous one.
Each subsequent layer of material is applied in a direction perpendicular to the application of the previous layer.
After applying the material, the surface should be protected from adverse weather conditions: direct sunlight, strong wind, precipitation, high and low temperatures.
The equipment must be cleaned immediately after application. Once the material has hardened, it can only be cleaned mechanically.
Technical specifications
| Color | Black |
| Density | A: 1 ± 0.02 A+B: 1.12 ±0.02 kg/l |
| Package | Set 32 kg |
| Best before date | 12 months in a dry place in sealed packaging |
| Application | Surface temperature of application (+5°C) - (+30°C) |
| Initial drying time | 1 hour (20 °C) |
| Complete drying time | 5-6 hours (20 °C) |
| Waiting time before filling with soil | 3 days |
| Elongation coefficient | 100% |
| Crack bridging | > 2 mm |
| Heat resistance of the hardened product | (-25°C) - (+80°C) |
| Main attributes | |
|---|---|
| Country of origin | Türkiye |
| Manufacturer | Tekno Construction Chemicals |
| Type of use | Universal |
| Purpose of the material | For roofing, For floors, For basements, For facades, For plinths, For pools, For tanks, For balconies |
| Surface type | Concrete, Stone, Wood, Metal, Ceramics |
| Method of application | Mechanized, Manual |
| Number of components | Two-component |
| Consistency | Semi-liquid |
| Condition when applied | Cold |
| Material consumption | 1.5 kg/m2 |
| Package | Bucket |
| Material packaging (kg) | 32 |
| Color | Black |
| Physical characteristics | |
| Minimum application temperature | 5 degrees. |
| Maximum application temperature | 35 degrees. |