|
Quantity
|
Total
|
||
|
|
|||
Teknofay Flex is a reinforced, elastic, C2TES1 adhesive for ceramic tiles, porcelain, glass mosaics, marble, and granite with a high degree of adhesion and extended pot life.
Applications:
- Vertical and horizontal surfaces
- For interior and exterior use
- For residential buildings, shops, shopping centers, and industrial buildings
- For bonding in areas of constant contact with water
- For balconies and terraces, swimming pools, showers, and bathrooms
- For heated floors, thermal pools, and freezers
- For bonding ceramic and granite tiles to building facades
- For bonding to gypsum plaster, gypsum panels, concrete, and aerated concrete
Features and benefits:
- Waterproof
- Frost-resistant
- Easy to mix and apply
- Possesses high adhesion properties
- High density
- Saves time and labor
- Long pot life
Instructions for use
Before bonding, the surface must be cleaned of materials that could impede adhesion, such as weak parts, dust, oils, and detergents. Damaged surfaces must be repaired using appropriate Teknorep repair mortars. To prepare the mortar, pour 6-7 liters (per 25 kg of material) of clean water into a clean container. Slowly add the dry mixture and mix the mortar with a mixer at low speed for 5 minutes until a homogeneous mixture is achieved. Allow the mortar to sit for 5-10 minutes, then mix again for 2 minutes until smooth.
Notes on Use / Limitations
This material may cause skin irritation. Wear protective clothing, gloves, masks, and goggles when working with the material. Lay the tiles within 10 minutes of applying the adhesive. Adjust the position of the tiles for 15 minutes after laying.
If the material comes into contact with your eyes, rinse immediately with warm water and consult a doctor. Grout between tiles should be filled with Teknoderz grout no sooner than 24 hours after laying the tiles. Work should be carried out at an ambient temperature of +5°C to +35°C and a relative humidity of no more than 80%.
ХАРАКТЕРИСТИКИ
| Color | White |
| Best before date | 12 months in a dry environment in unopened packaging |
| Package | 25 kg bag |
| Mixing proportions | 6-7 l of water / 25 kg of powder |
| Consumption | 3-5 kg/m² |
| Application temperature | + 5 °C - + 35 °C |
| Operating temperature | - 40°C - + 80°C |
| Pot life of the mixture | 3 hours |
| Readiness for mechanical impacts | 24 hours on the floor, 8 hours on the wall |
| Slip resistance | 0.5 mm |
| Strength of adhesive bond | more than 1 N/mm² |