Acrylic primer for concrete surfaces under gypsum and plaster Teknolatex 200 (12 kg). Green

Teknolatex 200 is an acrylic dispersion-based primer for concrete surfaces under plaster and gypsum.
 

Applications:

• For interior and exterior use on vertical and horizontal surfaces
• For priming walls and ceilings
• To increase the adhesion of gypsum, lime, and cement-based plaster mixes to concrete surfaces

Primer Properties:

• Ensures strong adhesion
• Prevents rapid moisture loss from the surface
• Highly waterproof
• Easy to use

Instructions for use:

• Before applying the material, clean the surface of any oil, rust, detergents, dirt, or other substances that may impede adhesion.
• To prepare the working solution, pour 6 liters of clean water into a clean container and pour in the dry powder (12 kg) of Teknolatex 200. Using a low-speed mixer (400-600 rpm), mix the mixture until smooth. The primer can be applied to the surface with a brush, roller, or mechanical sprayer.

Notes:

• Suitable for interior use only.
• Do not add any foreign materials to the mixture.
• Immediately after applying the waterproofing, protect the surface from adverse weather conditions (direct sunlight, high temperatures ≤ +35°C, precipitation, and frost).
• Wash tools and equipment immediately after use.
• The product may cause irritation if it comes into contact with skin. Wear protective clothing, gloves, a mask, and goggles. You can apply the primer to your hands before starting work.

CHARACTERISTICS