Concrete retainer, protective layer 50 mm, 100 pcs (15 kg)

Concrete reinforcement retainer BK T 50 mm – for creating a protective layer of concrete

The BK T concrete support is designed for the correct installation of the lower horizontal reinforcement and the formation of a protective layer of concrete 50 mm thick. The product is made of high-strength concrete of class C35/45, which ensures reliability, durability and resistance to significant loads during concreting.

Thanks to the wide support base, the clamp is stably located on the surface and reliably holds the reinforcing frame in the design position. The use of concrete clamps allows you to obtain a uniform protective layer of concrete in accordance with the requirements of modern monolithic construction.

Advantages of the BK T concrete fixer

• made of high-strength concrete of class C35/45;
• provides a protective layer of reinforcement of 50 mm;
• withstands high mechanical loads;
• has high compressive strength;
• does not deform during temperature changes;
• characterized by high physical and chemical resistance;
• has good adhesion to concrete;
• compatible with monolithic concrete structures;
• creates a homogeneous concrete structure without foreign inclusions;
• completely fireproof;
• has precise geometric dimensions;
• especially effective when working with large diameter fittings.

Recommended distance between clamps

To ensure the correct position of the fittings, it is recommended to follow the following installation step:

• for Ø10 mm reinforcement - no more than 500 mm;
• for reinforcement Ø12–20 mm - no more than 1000 mm;
• for fittings over Ø20 mm - no more than 1250 mm.

Technical specifications

• Type: concrete rebar clamp BK T
• Material: high-strength concrete C35/45
• Protective concrete layer: 50 mm
• Packaging: 100 pcs/bag
• Bag weight: 15 kg
• Quantity per pallet: 50 bags
• Pallet weight: 750 kg

BK T concrete anchors are widely used in the construction of foundations, floor slabs, monolithic structures and other reinforced concrete elements, where it is necessary to ensure the exact position of the reinforcement and compliance with the regulatory protective layer of concrete.