|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Teknobond 600 TIX is a high-quality textured finish color coating based on epoxy resin for concrete bases and surfaces. It creates a strong and non-slip coating, resistant to moisture, abrasion, exposure to various chemicals and acids. It provides reliable protection of the surface from atmospheric phenomena, retains color and shine for a long time both indoors and outdoors.
APPLICATION
FEATURES / ADVANTAGES
MATERIAL INFORMATION
|
Packaging |
20 kg set |
|
Expiration date |
12 months from date of manufacture, when stored in original undamaged packaging. |
|
Storage conditions |
Store in unopened and undamaged original packaging in in dry conditions at temperatures from +5 °C to +30 °C. |
|
Color/Type |
RAL |
|
Density |
Ready working mixture: 1.45 ± 0.05 (g/ml) |
TECHNICAL INFORMATION
|
Material base |
Epoxy resin |
|
Mixing proportions |
5,25 units of component A : 1 unit of component B (by weight) |
|
Mixture life |
~ 30 min (depending on ambient temperature) |
|
Cost |
~ 0.5 kg/m² |
|
Full curing time |
9 days |
|
Application temperature |
+5 °C - +30 °C (possible significant increase or decrease in time) drying depending on temperature) |
|
Adhesion |
To concrete ≥ 4 N/mm² To metal ≥ 3.0 N/mm² |
APPLICATION INSTRUCTIONS
SUBSTRATE QUALITY / PREPARATION
The surface must be free from dust, dirt, loose particles, cement mortar residues, oils, silicones and must be dry. The concrete base must be clean, strong and have sufficient compressive strength (at least 25 N/mm²) and tear strength of at least 1.5 N/mm². Damage, cracks, potholes on the concrete surface must be repaired in advance using appropriate cement (Teknorep/Teknogrout/Teknoself) or epoxy (Teknobond 400D/405D) repair mixtures.
KNEADING
CAUSING
Make sure that TEKNOBOND 600 TIX is applied to a solid, thoroughly cleaned and non-porous surface. To strengthen the surface and reduce absorption, use TEKNOBOND 300 primer (in 2 coats).
TEKNOBOND 600 TIX is applied with a "coral" or regular paint roller.
CLEANING THE TOOL
Clean tools and equipment with water immediately after use. Once the material has cured, it can only be removed mechanically.
LIMITATION
SAFETY MEASURES
The product may cause irritation if it comes into contact with the skin. It is necessary to use work clothes, protective gloves, a mask and glasses. You can also apply a protective cream to your hands before starting work. In case of contact with eyes, immediately rinse your eyes with warm water and consult a doctor.
MATERIAL DATA BASIS
The above technical data are obtained from laboratory tests conducted at a temperature of + 20 °C and a relative humidity of 50% in the Tekno Yapı Kimyasalları laboratory. The results are obtained 28 days after the tests. The actual characteristics of the material may change for reasons beyond our control. Since we are unable to control the installation process and operating conditions, we are only responsible for the quality of the material. The production of materials is periodically optimized and improved, we have the right to make changes to the technical description of the materials without informing the customer.