Two-component polymer-modified thick-layer bitumen mastic ADW Izoplast 2K-W without solvents (32 kg)

Izoplast 2K-W is a two-component, solvent-free bitumen-polymer emulsion, modified with a synthetic polymer, for applying thick-layer elastic water-repellent coatings.

Application:

• For performing thick-layer waterproofing, interlayer waterproofing under monolithic screeds
• In rooms with high humidity, balconies and terraces
• For gluing insulation boards (EPS, XPS), roll materials for thermal and waterproofing

Advantages of the material:

• Ready to use
• Has high adhesion
• Suitable for all types of horizontal and vertical surfaces
• Suitable for protecting foundations and other underground parts of buildings
• Does not contain harmful substances
• May be in contact with drinking water
• Has excellent penetrating properties
• Can be used on wet surfaces
• Protects building elements from the effects of aggressive substances

Surface preparation:

Before applying the material, the surface must be cleaned of dirt, dust, oils and other substances that prevent adhesion. Izoplast 2K-W must be used on fresh concrete surfaces after the concrete has dried.

Material preparation:

Stir the material thoroughly before use.
For use as a primer, Izoplast 2K-W must be diluted with clean water in a ratio of 1:1.

Material application:

IZOPLAST 2K-W is applied to a previously primed surface with a smooth spatula or a notched trowel. The next layer should be applied after the previous one has completely dried. The drying time depends on the temperature and humidity of the environment and the substrate (about 8 hours). Complete drying is after about 3 days.

Recommendations for use, storage and transportation:

• Mix well before use.
• Store and transport at a temperature not lower than +5°C,
• Follow weather conditions as directed.
• Read the product safety data sheet before use.

 COST TABLE: