Decorative plaster with "Travertine" effect for walls Granito Travertino, 20 kg

Granito Travertino - Decorative cement-based coating enriched with chemical additives. Designed to create various design effects in the interior.

Areas of application

• Objects: Decorative decoration of walls and ceilings inside the premises.
• Surface types: Rough plaster, concrete, old painted surfaces.
• Gypsum bases: After priming with Granito Astar, it can be applied to gypsum plaster and drywall.
• Special areas: Suitable for bathrooms and kitchens, provided that the instructions for surface protection are followed.

Advantages and features

• Aesthetics: Perfect imitation of natural stone.
• Integrity: In combination with Granito Floor material, it allows you to create a single design of walls and floors.
• Convenience: Can be applied over the existing coating without dismantling it. Creates a seamless surface.
• Reliability: Combines mineral strength and elasticity.
• Comfort: Allows walls to "breathe" (vapor permeable), but does not let water in. When using Granito Cila varnish, it becomes completely waterproof.
• Personalization: Easily tinted with pigments suitable for cement systems.

Application instructions

1. Surface preparation:

• The substrate must be dry, sound and free from dust, dirt and grease.
• Old, flaking paint must be completely removed.
• Important: New mineral surfaces must be allowed to cure (withstand a curing period) for at least 28 days.
• Old synthetic coatings must be sanded thoroughly and dust removed.
• Fill cracks with a repair compound (e.g. Teknorep 200).

2. Mixing the mixture:

• Use a low-speed drill with a mixer.
• Pour water into a bucket. If you plan to tint, add the pigment to the water first.
• Gradually pour in the powder, stirring until smooth.
• Let the solution “ripen” for 1–3 minutes, then stir again.

3. Application process:

• Applied with a metal trowel in 2 or 3 layers (with a waiting period between layers).
• Total coating thickness: 2–4 mm.
• The pattern (texture) is created with a metal or effect trowel.
• To obtain a shine, the surface can be “pressed” with a spatula while wet or sanded after drying.

4. Finishing stage:

After completing the work, the entire surface is covered with Granito Cila protective varnish according to the purpose of the room.

Notes on use and restrictions

• Protection: After application, the surface must be protected from contact with water for 24 hours.
• Care: It is forbidden to use abrasive products to clean the finished coating.
• Ceramics: When applying over ceramic tiles, it is mandatory to use a reinforcing mesh.

Technical specifications

The figures given are approximate. They are obtained in the Tekno Yapı Kimyasalları laboratory under standard conditions: temperature +20°C, humidity 50% and coating aging for 28 days. In real conditions, the results may differ slightly depending on the environment.