|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Granito Art is a ready-to-use colored decorative plaster based on acrylic emulsion. Designed to create a modern effect of bare concrete both indoors and on facades.
Fields of application
- New surfaces: rough plaster, concrete, cement and gypsum boards.
- Old surfaces: Painted surfaces (after preparation).
- Decor and hobbies: You can apply to wood and metal to create design objects.
Advantages and features
- Design: gives an authentic look of rough concrete; allows you to create an infinite number of patterns depending on your imagination and application technique.
- "Breathable" walls: High vapor permeability allows moisture to escape, preventing the formation of fungus.
- Eco-friendly: Without solvents, diluted with water, does not have a strong smell. Safe for people and the environment.
- Stability: Withstands the influence of alkalis and external factors.
- Customization: You can mix different colors of the Granito series, creating unique shades.
Application instructions
1. Surface preparation:
Clean the wall from dust, mud, grease and layers of old peeling paint. The surface must be dry and strong.
- New concrete: Must be cured for at least 28 days before finishing.
- Old paint: Glossy surfaces must be sanded (cleaned with sandpaper) and dust removed.
- Repair: level cracks and irregularities with TEKNOREP 110 material.
2. Priming:
- For heavily soiled surfaces, use TEKNOLATEX 300 soil.
- For new absorbent surfaces – TEKNOLATEX 100.
3. Applying decor:
Apply the plaster to the wall with a steel trowel, spreading it evenly over the surface.
Form the desired pattern (concrete texture) while the material is wet.
Important information: Keep the temperature not lower than +5°C during work and during the day after it.
4. After work:
Immediately rinse the instruments with clean water.
Keep the buckets tightly closed at temperatures from +5°C to +35°
Notes on application and limitations
Локальные нормы: Характеристики продукта могут отличаться в зависимости от страны из-за местных правил. Всегда сверяйтесь с местной технической документацией.
Безопасность: Для получения информации о безопасной транспортировке, хранении и утилизации (включая токсикологические и экологические данные) обязательно ознакомьтесь с Паспортом безопасности (SDS).
Technical characteristics
| Packaging | Plastic bucket 20 kg. | |||||
| Storage | In a closed original package at a temperature from +5°C to +35°C | |||||
| Density | ~1,70 g/l. | |||||
| Instruments | A small steel trowel (spatula) or a regular spatula | |||||
| Application temperature | From +5°C to +35°C | |||||
| Drying time |
Can be touched: 1–2 hours. Full drying: 24 hours. |
|||||
| Material consumption | 1.5 kg per 1 m² (one 20 kg bucket is enough for approximately 13-14 m²) |