Corner bumper CG 76V vinyl for protecting walls and corners (Turkey), blue color, 3 linear meters.

CG 76B is a corner protection system that can be used in any structure such as hospitals, restaurants, hotels, dormitories, universities, military buildings and public buildings, which has a decorative vinyl top coating that does not deform or wear out. 

Assembling:

• Determine the height of the corner bumper.
• If you need to trim the bumper, use a jigsaw or a construction knife and a metal ruler (square).
• Make sure the wall is dry and clean.
• Remove all irregularities in the wall for best results.
• Before applying the glue, wipe both sides of the bumper to make sure the surfaces are free of dust and dirt.
• Apply the glue only to the wall surface, use a D2 or B3 spatula to distribute the glue. It is recommended to use water-based contact glue (KIILTO EXTRA, DENLAKS TK-580). Consumption 300-350 g of glue per 1 m2.
• Allow the glue to cure, under normal conditions this will take 10 to 15 minutes. However, the curing time depends on temperature and humidity.
• Important: 59 glue specification or other adhesives before starting application.
• Place the bumper sheet on the wall, align and press it into place by hand.
• Roll the bumper strip using a pressure roller. Start rolling in the center of the sheet and work your way out to the edges. Remove any excess adhesive after installation.

Note: This model does not come with any accessories.

Corner bumper 

Size: 76x76 mm

Profile length: 3 m

This profile is additionally sold with plugs, external and internal corners, and accessories.