|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Teknomer 300 is a seamless acrylic water-based waterproofing mastic designed to reliably protect various surfaces from water and moisture. Suitable for waterproofing swimming pools and drinking water tanks, as well as terraces, balconies and roofs made of concrete, slate, roofing felt and corrugated iron. Effectively used indoors - in bathrooms, showers, kitchens and laundries.
The material is highly resistant to ultraviolet rays, retains its properties under the influence of the sun, and can be used as a base for any finishing coatings.
Scope:
Advantages:
Instructions for use:
The surface must be flat, free from dust, dirt, oils and other substances. If there are cracks or potholes on the surface, they must be closed using the appropriate Teknorep repair compounds. After repairing the surface, the mastic should be applied no earlier than 72 hours later. Mix before use. To use Teknomer 300 as a primer, the material must be diluted with water in a ratio of 1:1. The material must be applied using a brush, roller or sprayer, each subsequent layer should be applied perpendicular to the previous one. If desired, you can use a fiberglass reinforcing mesh.
To obtain absolute protection against moisture, it is recommended to tape all joints and corners with waterproofing tape.
Usage Notes/Limitations:
Observe safety and labor protection techniques during work. Use protective gloves, clothing, glasses. In case of contact with skin, wash with plenty of soap and water. In case of contact with eyes, rinse with plenty of water and consult a doctor.
FEATURES
|
Composition |
Water-based acrylic mastic |
|
Color |
White |
|
Packaging |
Bucket 3 kg/20 kg |
|
Hydrophobicity |
5 Bar (positive) |
|
Interval between layers |
5 hours |
|
Consumption (waterproofing) |
1.53 kg/m2 |
|
Complete waterproofness |
7 days |
|
Application temperature |
from + 5 °C to + 35 °C |
| Operating temperatures |
from -25 °C to + 80 °C |
| Elasticity |
300% |