Teknoser Sodyum – liquid silicate colourless hardener 5 kg.

Teknoser Sodyum is a liquid lithium silicate colorless hardener. It is also used to prevent dust formation.

Areas of application:

• For industrial floors
• For warehouses
• For warehouses with low temperatures
• For outdoor and indoor parking lots
• For aircraft hangars and runways and helicopters
• For moorings

Features and benefits:

• Increases the strength of concrete thanks to crystals that penetrate deep into the pores
• Increases the density of concrete
• Increases surface wear resistance
• Eliminates dust formation from coated surfaces
• Prevents cracking
• Does not contain solvents
• Prevents surface damage at low temperatures
• Vapor permeable
• Creates a glossy finish
• Does not require a finish coat

Instructions for use:

• Before applying the material, the surface should be cleaned of any oil, rust, detergents, dirt and other substances that prevent setting. The surface should be dry, hard and strong, without water leaks.
• The quality of concrete should be from 20/25.
• The quality of the screed is from EN 13813 CT-C25-F4.
• Freshly laid concrete does not require special preparation.
• Before applying the material, the surface should be moistened.
• Teknoser Lityum should be applied to fresh concrete or screed using a spray gun in one layer, filling the pores of the surface. The material should be distributed over the surface with a fibrous brush or rubber spatula.

Usage Notes / Limitations:

• Avoid use in windy, extremely cold and rainy weather.

• Surface hardener may vary in shades depending on the type of concrete surface to which the mixture is applied.

• Acidic cleaners should not be used.

• Regular cleaning of the surface increases its shine.

• Tools and equipment used should be washed immediately after use.

FEATURES