Teknorep 200 EX is a thin-layer polymer-cement reinforced repair mixture for vertical and horizontal surfaces, reinforced with polymer fibers.
Application area :
For repairing concrete surfaces after formwork removal
For repairing damage and cracks on any mineral surfaces
For the repair of concrete products and structures in all types of engineering structures
For repairing prefabricated reinforced concrete elements
For removing defects up to 30 mm thick
Advantages
Easy to apply.
Does not cause corrosion.
Reinforced with microfibers
Used to obtain a smoother surface during minor repairs.
Resistant to freezing and thawing.
Has high adhesive strength.
Suitable for vertical and horizontal applications.
Has high compressive strength.
Instructions for use
The surface must be prepared for application, free from dust, oil, dirt, rust, mold, grease and waste. The surfaces must be primed beforehand. 4 - 5 liters of clean water are required for 25 kg of powder. Teknorep 200 is gradually added to a clean container with water. Mixing is carried out using a low-speed mixer until a homogeneous mixture is obtained. The mixing time must be at least 5 minutes. The resulting solution must be kept for 3 minutes and mixed again for 2 minutes until a homogeneous mixture is obtained. Water should not be added to the prepared mixture.
Recommendations for use
After application, the surface must be protected from direct sunlight, strong wind, high air temperature (above +35°C), rain and frost for the first 3 hours.
The reaction time of cement-based products depends on the ambient temperature. The reaction time is reduced when the temperature increases and increased when it decreases.
When applying the product, wear work clothes that comply with occupational safety and hygiene regulations, use a protective mask and goggles.
After use, the tool must be cleaned immediately with water. Once the solution has hardened, it can only be cleaned mechanically.
The prepared solution is applied to the surface with a spatula. If necessary, apply a layer more than 30 mm thick, perform the work in several layers.
Characteristics
Color
Gray
Expiration date
12 months in a dry environment in closed packaging
Delivery options are subject to confirmation by our manager.
Self-pickup from our warehouse in Kyiv – free of charge.
Postpaid "Nova Poshta"
The buyer-recipient of the parcel pays the cost of the goods and a commission of 2% + 20 UAH from the order amount.
Non-cash payment with VAT
After placing and confirming the order, an invoice with payment details will be sent to your email address.
Non-cash payment
After placing and confirming the order, an invoice with payment details will be sent to your email address. The invoice can be paid through a bank branch or via Internet banking.
Attention! This payment method does not provide for card-to-card transfers!
