Mastic bitumen-polymer elastic Teknomer 405 W 18 kg.

Bitumen-polymer elastic water-based emulsion.

Application areas:

• Ceilings, roofs, foundations, retaining walls, columns.
• As a waterproofing agent to protect concrete, brick, iron and wood surfaces from water and moisture.
• Waterproofing of drainage and sewer channels, collectors.
• Waterproofing of sumps, wells, tanks.
• Rooms and places with high humidity.

Features and Benefits

• Ready to use.
• Forms a solid and seamless waterproofing layer.
• Can be applied by brush, roller or airless spray.
• Maintains elasticity even at low temperatures.
• Since it does not contain solvents, it is environmentally friendly and can be used indoors.
• Can be applied to dry and slightly damp surfaces.

Surface preparation and application

The surface to be applied must be free of dust, oil, dirt, rust and other substances that may reduce the adhesion of the material.

Weak parts of the surface, cavities, holes and cracks must be repaired in advance with appropriate Teknorep repair mortars.

Before applying Teknomer 400 W, the prepared surface must be covered with Teknomer 400 Astar bitumen-rubber primer.

Before using the material, it must be stirred for 5 minutes until a homogeneous mixture is formed.

The mixed, ready-to-use product is applied to the surface with a stiff-bristled brush, roller or spray. Each subsequent layer of material is applied no earlier than 1 hour after the initial application.

Each subsequent layer of material is applied in a direction perpendicular to the application of the previous layer.

After applying the material, the surface should be protected from adverse weather conditions: direct sunlight, strong wind, precipitation, high and low temperatures.

The equipment must be cleaned immediately after application. Once the material has hardened, it can only be cleaned mechanically.

Technical specifications