|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Teknobond 860 is a three-component, highly effective, non-shrink repair mixture based on epoxy-cement, does not contain solvents.
Application area:
For installation of equipment, profiles, reinforcement outlets in concrete and reinforced concrete bases
For repair and filling of cracks in concrete surfaces
For repair and installation of prefabricated elements made of reinforced concrete
Advantages:
Does not cause shrinkage.
Non-toxic.
Waterproof.
Resistant to freeze-thaw cycles.
Resistant to various chemicals, oils, acids.
Has high resistance to abrasion and impacts.
Has high mechanical strength.
Instructions for use
The surface must be prepared for application, free from dust, oil, dirt, rust, mold. The humidity of the base should not exceed 4%. The application surface should be pre-treated with Teknobond 300 primer before use.
Mixing the working solution
Add the contents of the container of component B to the container of component A. Mix with a low-speed electric mixer until the mixture becomes homogeneous. Then pour the mixture into a clean empty container and mix with a mixer at low speed (up to 600 rpm) and continuously add component C. Continue mixing for at least 3 minutes until a homogeneous solution is obtained.
The working solution is applied to the primed base using a spatula/trowel.
Recommendations for use
After application, the surface must be protected from direct sunlight, strong wind, high air temperature (above +35 ° C), rain and frost.
When applying the product, wear work clothes that comply with occupational safety and hygiene regulations, use a protective mask and goggles.
After use, the tool must be cleaned immediately with water. Once the solution has hardened, it can only be removed mechanically.
CHARACTERISTICS
|
|
Component A - transparent liquid Component B - light yellow liquid Component C - light yellow powder |
| Storage in a dry, dark warehouse, at a temperature range of +5°C - +35°C, humidity 75% | 12 months in closed original packaging |
| Consumption, kg/m3 | 2,0 |
| Packaging | Set of 20 kg |
| Application temperature (air and surfaces) | +5 С - +35 С |
| Workability time, not less than, min | 30 |
| Density of the mixture, kg/l | 2,0 |
| Application thickness, mm | 10-50 |
| Consumption, at a thickness of 1 mm, kg/m2 | 2,0 |
| Compressive strength, MPa, not less, (1 day) | 50,0 |
| Strength at compression, MPa, not less, (28 days) | 75,0 |
| Bending tensile strength, MPa, not less (1 day) | 25,0 |
| Bending tensile strength, MPa, not less (28 days) | 30,0 |
| Adhesion strength to concrete base, MPa, not less than | 3,0 |
| Main attributes | |
|---|---|
| Manufacturer | Tekno Construction Chemicals |
| Country of manufacture | Turkey |
| Material condition | Dry mix |
| Type by composition | Polymeric |
| Type of use | Universal |
| Packaging | Пластикова банка |
| Material packaging (kg) | 20 |
| Color | Yellow |
| Number of components | Three-component |